The development of Pneumatic Vibrators

The performance of Pneumatic Vibrators and other vibratory equipment has reckoned us as trusted manufacturers, suppliers, and exporters of a wide array of industrial equipments. The Hydro check Pneumatic Vibrators are used to aid flow of materials from chutes and hoppers. These are also used for compacting of material in moulds and containers or separation of different sizes of materials on screens. Vibrating frequency can be controlled by manipulating air flow to suit process requirements. adjustable shocks can be used in dusty and wet environments and are available at reasonable rates.The features is dust and water proof construction、Impeccable performance、Low energy consumption.

Pneumatic vibrator Performance Introduction from holidpneumatic

Housing is made of rust-proof aluminum, built-hardened steel raceway, ball can roll on Velocity and Feed Controllers. Nylon end caps at both ends of the housing means for positioning the ball while preventing the entry of dust and water, and therefore allows the unit to operate in dusty and wet environments. Jin, outlet pipe threads are standard, so that the exhaust polyurethane tube can be drawn to ensure barrier-free exhaust. To adapt to different installation location.

Pneumatic Vibrator can produce a powerful vibration energy

High speed and high eccentric moments combine to make this hydraulic shock can produce a powerful vibration energy.Housing is made of extruded aluminum, enamel surface burn there, cover hardened, which makes it suitable for food and pharmaceutical industries.turbine vibrators subject to the existing factory test conditions international noise regulations.Vibrations caused by the centrifugal force of positive and negative torque rotor imbalance caused by production. Rotor by a pair of heavy-duty prelubricated ball bearings with dust seal, special grease to ensure that permits its working life.Within the bearing outer race is designed so that people can use a pin wrench hinge damper is very easy to replace the bearings.Cover with a left-handed or right-handed thread and can be self-locking.

A convenient and practical pneumatic vibrator is widely applied in many fields

Pneumatic vibrator,simply buy is the use of air compressor discharge high pressure body into the product gas at the inlet,when the gas pushes the piston upward, the piston paint indoor gas will be squeezed, and squeezed gas through the exhaust holes. When the piston reaches the end of the line, the gas will automatically switch to the gas through the airway and the groove, and the gas can enter the gas chamber. If the high-pressure gas pushes the piston down to the end, then the first cycle is over, the second cycle to begin, reciprocating cycle of the vibrator shaking and translation, resulting in vibration force.Pneumatic vibrator,hydraulic shock is mainly made of extruded aluminum shell.Even under the special environment of the application, for example, manufacturing, housing may be formed by stainless steel, the internal a rotor or a steel ball in the cabinet of high-speed rotary and centrifugal force generated. In general, hinge damper is suitable for use in wet or dusty environment. And in the exhaust port and the inlet have standard pipe thread, to a certain extent, it can ensure that the exhaust gas flow.This convenient gas use vibrator, is widely used in many fields, such as: mining industry, separator, the pharmaceutical industry, and automobile manufacturing. Its deeply loved by consumers, won the trust and recognition of the vast number of consumers.

The structural characteristics of pneumatic components PU tube

State transparent tube PU tube pneumatic component with high transparency,medium flow is clearly visible. High resilience polyurethane raw material manufacturing; makes pneumatic tube having a small bend radius, easier to install.Yellowing resistance of more than three,easy to turn yellow.Color tubes imported weathering toner,color standard color tubes manufactured, bright,not fade for a long time to work.pu tubing using online diameter control system, longer life.

Hydraulic speed controls adopts the fully closed structure, action accurate and uniform

Hydraulic speed controls adopts the fully closed structure, action accurate and uniform,. When the hydro check piston rod is pressed,hydraulic buffer  hydraulic oil under pressure outflow from the adjustable overflow oil hole, provides the whole stroke with a constant feed control precision. By rotating the end of the outer shell outer adjustment knob can realize the adjustment of the feed speed. Fixed aluminum base makes oil buffer easier to install and adjust knob to velocity and feed controllers more convenient, at the same time under the condition of temperature difference will not affect the steady speed function.