How to extend the hydraulic shock absorber service life effectively

Hydraulic shock absorber, in short, is to rely on hydraulic damping on the objects in its upper body to slow down until the stop, to a certain extent, can play a protective role. Usually, as a consumer, in order to extend the service life of the hydraulic shock absorber, it is necessary to regularly clean it.

1. Make sure that the hydraulic recoil buffer can not be cleaned with sewage. As the sewage contains large amounts of impurities in the entire cleaning process, the impurities left in the device above, not only can not be the oil shock absorber clean, and the more dirty the more wash.

2. Try not to clean the hydraulic buffer with a full wet towel. The material made of metal products, long-term use of water for cleaning, easy to cause corrosion on its surface, aging and shedding of the phenomenon, greatly shorten its life.

3. Add the right amount of cleaning fluid or professional care solution. For dust that can not be removed by the hydraulic shock absorber, it is not possible to clean it by the common method. It is necessary to add a cleaning solution to the clean water to achieve a better cleaning effect.

4. Do not use a towel with a sharp clean hydraulic shock absorber, is likely to cause scratches on its surface, friction.

Therefore, the hydraulic buffer in the cleaning process, the need to fully consider all aspects, to avoid product quality problems.

Pneumatic vibrators offers a superior power-to-weight ratio in a lightweight, compact, sealed design

This highly efficient, food-grade, low-noise pneumatic vibrators offers a superior power-to-weight ratio in a lightweight, compact, sealed design. That Holid pneumatic component provides high-frequency, controllable speed, and low-amplitude, gentle vibration. The turbine has integrated flyweights that rotate on two oversized ball bearings. This unit is maintenance-free when used with filtered/lubricated air.

ad2525 Holid shock absorbers

The main structure of hydraulic industrial shock absorber consists of body, shaft, bearing, inner tube, piston, hydraulic oil, spring and so on. When the shaft is impacted by external force will drive the piston squeeze the hydraulic oil, When the external force disappears, the spring will spring back to the starting point of the piston to wait for the next action, so the inner tube of the oil discharge hole - discharge, while the inner tube of the hydraulic oil from the inner tube back to the oil hole back to the inner tube; Principle, the holid shock absorbers will be able to move objects in the smooth and effective stop.

The design of the of industrial pneumatic vibrators

The design of the of industrial pneumatic vibrators is very simple, but can produce strong vibration of the centrifugal force. The shell consists of a material aluminum oxide, the internal copper alloy precision roller, hardened steel floor consists of two high impact support. In order to facilitate the installation, the housing has four mounting holes, namely, two horizontal and two vertical mounting holes. Air from the shell on the two intake of the entrance into the air. These air inlet holes are provided with a standard pipe thread and - pneumatic air tubing plug for closed non - use inlet holes. The air self muffler impact resistant side discharge.

The Selection and Application of Hydraulic Buffer

1, the selection of industrial floor buffer Attention points 1) movement direction. (Horizontal, free fall, rotation, etc.) 2) the overall weight of moving objects. 3) Additional propulsion. (Gas, hydraulic cylinder, motor) 4) instant impact speed 5) the number of impact per hour 6) the number of the same side of the installation.

2, the function of the hydraulic buffer 1) to eliminate non-mechanical movement of the industrial shock absorber and collision damage, such as the impact of 2) substantially reduce noise and provide a quiet working environment 3) accelerate the mechanical action frequency, increase production capacity 4) Quality products 5) to extend the mechanical life and reduce after-sales service.

3, hydraulic buffer applications 1) manipulator, take out the arm, feeding equipment, screen printing machine, printing machines, Rubber and plastic machinery 3) steam locomotive manufacturing, carpentry, construction machinery, air transport industry. 4) national defense military equipment, medical and health equipment, environmental protection equipment.

Pneumatic vibrators is a set of appearance, quality, performance is equal to one of the outstanding products

Industrial shock absorbers company offer the pneumatic vibrators is small in size, but it is a very good product.The pneumatic oscillator shape color is blue, the surface looks very beautiful. Is a set of appearance, quality, performance is equal to one of the outstanding products.the industrial pneumatic vibrators provides a new method for the transmission of fine material. Since it is pneumatic, the frequency can be controlled by adjusting the air pressure.

The performance of pneumatic vibrators and other vibratory equipment

The performance of Pneumatic Vibrators and other vibratory equipment has reckoned us as trusted manufacturers, suppliers, and exporters of a wide array of industrial equipments. The industrial pneumatic vibrators are used to aid flow of materials from chutes and hoppers. These pneumatic components are also used for compacting of material in moulds and containers or separation of different sizes of materials on screens. Vibrating frequency can be controlled by manipulating air flow to suit process requirements. These can be used in dusty and wet environments and are available at reasonable rates.