How to extend the hydraulic shock absorber service life effectively

Hydraulic shock absorber, in short, is to rely on hydraulic damping on the objects in its upper body to slow down until the stop, to a certain extent, can play a protective role. Usually, as a consumer, in order to extend the service life of the hydraulic shock absorber, it is necessary to regularly clean it.

1. Make sure that the hydraulic recoil buffer can not be cleaned with sewage. As the sewage contains large amounts of impurities in the entire cleaning process, the impurities left in the device above, not only can not be the oil shock absorber clean, and the more dirty the more wash.

2. Try not to clean the hydraulic buffer with a full wet towel. The material made of metal products, long-term use of water for cleaning, easy to cause corrosion on its surface, aging and shedding of the phenomenon, greatly shorten its life.

3. Add the right amount of cleaning fluid or professional care solution. For dust that can not be removed by the hydraulic shock absorber, it is not possible to clean it by the common method. It is necessary to add a cleaning solution to the clean water to achieve a better cleaning effect.

4. Do not use a towel with a sharp clean hydraulic shock absorber, is likely to cause scratches on its surface, friction.

Therefore, the hydraulic buffer in the cleaning process, the need to fully consider all aspects, to avoid product quality problems.

Holid Pneumatic-Hydraulic shock absorber Features

Buffer is an adjustable initial pressure of the adjustable shock absorber, the buffer section to adjust the scale of the initial movement the greater the pressure will be greater. The benefits of this hydraulic recoil buffer feature is that it can be set to a certain pressure not to movements of the function to prevent malfunction occurs. And for the case of manual adjustment in the case of mounting dimensions remain unchanged and pressure vary depending on usage needs to be adjusted! ) Its structure contains a pressure controlled by a pressure release valve, and a combination of the position of the flow control valve from the buffer system, it acts on the piston rod of the flow of energy into the oil. Can automatically adapt to various buffer requirements within the permissible limits of energy. Built-in compression spring piston rod will return to the initial position. This structure can be more stable and more effective absorption of consumed impact, reduced vibration, reducing the impact on the buffer and installation of mechanical damage and increase the life of the product, as well as reduce the number of routine maintenance. Greatly saving the cost of production!