Air Source Treatment Unit and installation sequence

The installation sequence of the pneumatic air source treatment unit is also stressful, generally from left to right, first of all the first is the water separator, its role is mainly used in the water filter in the filter to the gas in the gas to filter out , Followed by the pressure reducing valve, mainly used to reduce and control the size of the export pressure, followed by the air regulator lubricator, most of the oil used in the oil mist oil turbine oil No. 1, mainly used to lubricate the pneumatic components , The principle is to oil into oil mist output to the compressed air.

To use air source treatment with rational method

The air source treatment is used to clean the air supply and filter the moisture and impurities in the compressed air to avoid moisture entering the cylinder and other devices such as the solenoid valve. The pressure regulator filter regulates the air supply so that the air supply pressure is in a constant state, reducing the damage to the solenoid valve or the cylinder type due to the gas pressure change. The oil mist can lubricate the air and pneumatic components. When these safeguards in place, it will greatly extend the cylinder, solenoid valves and other pneumatic components of the service life, so the rational use of gas source processor is very important.

Holid pneumatic components

HOLID is your premier resource for pneumatic components and value added services. As our name suggests, we specialize in pneumatic products. From air cylinders and directional control valves, to industrial shock absorber, rate control devices, aluminum framing and tie rod cylinders we have the products to suit any application. We work with your ideas to create complete solutions, and not just parts. We have the application knowledge and expertise to assist you in your design.

The performance of pneumatic vibrators and other vibratory equipment

The performance of Pneumatic Vibrators and other vibratory equipment has reckoned us as trusted manufacturers, suppliers, and exporters of a wide array of industrial equipments. The industrial pneumatic vibrators are used to aid flow of materials from chutes and hoppers. These pneumatic components are also used for compacting of material in moulds and containers or separation of different sizes of materials on screens. Vibrating frequency can be controlled by manipulating air flow to suit process requirements. These can be used in dusty and wet environments and are available at reasonable rates.

Pneumatic vibrators

Pneumatic vibrators are ideal for use in evironments where there is a risk of explosion. They are an inexpensive alternative to electric vibration motors and due to their light weight and small size, the pneumatic components can perfectly be mounted at constructions where small space is available.